Connect with us


How To Install a Three-Way Switch For A Ceiling Fan And Light



bedroom, sheets, luxury

During the warmer months, fans help keep you more relaxed; during the cooler months, they help keep the heat moving and warm.

You will be able to manage the fan from another area, in addition to the fact that these switches are efficient and enable you to make rapid adjustments to the fan speed and the intensity of the light.

Before starting, You should be familiar with the procedure if you intend to wire a three-way switch to operate your fan. It will ensure that the switch is installed correctly.

You should only move forward with this project if you have expertise working with essential electrical equipment.

yellow blue and black coated wires\

How to Get Started, as well as Safety

If you have no prior electrical work expertise, you should refrain from attempting to wire a three-way switch. In any situation in which you feel even the slightest bit uncertain about what you are doing, you should always seek the aid of a qualified electrician.

If you will attempt this endeavor, you first need to go to the electrical panel and cut off the power to the entire area before you start. Give everyone else in the home instructions to keep the electricity off until you have done the job you are working on.

After you have mounted the ceiling fan box following the instructions provided by the manufacturer, proceed to mount the single or double gang boxes in their respective places.

The single gang box manages the light and fan functions simultaneously, while the double gang box is used for individually regulating the light and fan functions.

According to Family Handyman, wiring a three-way switch is more involved than wiring a standard controller, but if the method is followed correctly and with due consideration, it should prove beneficial.

You should connect the two boxes you have set up by running a cable of type NM 14-3 between them. All three conductors in this 14-3 cable—white, black, and red—will be insulated.

See also  How To Install A Nest Thermostat And You Need An Electrician For It?

In addition to that, it will have a ground wire that is exposed. If you are working on connecting to a 12-gauge wire, you should utilize a cable with a gauge rating of 12-3.

Putting the Wires Together

According to Family Handyman, you should use ground screws to connect the wires you removed to your three-way switch instead of using electrical tape. You must also use electrical tape to wrap any white wires you have pulled between the three-way controls to create “traveler wires.”

It is an essential step because, if you need to make repairs in the future, you can recall which wires are “hot” thanks to this step.

According to the Electrical 101 course, there is no universally accepted color scheme for the cables used in three-way switch travelers. Depending on whether you use an NM cable or conduit to conduct the wiring, these colors will change.

Three-Way Switch

Connect the black wire to the ceiling fan’s black wire, and then connect the red wire to the ceiling fan’s blue wire. Doing so will give you separate control over the light and the fan.

Orange wire nuts should be used to secure each of the connections. After that, arrange all of the cables in an orderly fashion within the ceiling box, and fasten the covers for the fan.–wtBC9P

Remove the outer sheath from the fan and light leg cables by going to the switch box where the lines for those components originate and doing it there.

Your ground wire should be twisted together using linesman pliers, except the two 6-inch tails. Execute a ground crimp at this point. For combined control on one switch, cut a bottom at its ground crimp, place a loop in the other tail, and then attach both to the ground screw while tightening.

Loop each tail for different light and fan control and attach it to a switch grounding screw. For combined power on one switch, loop each tail.

Remove half an inch of insulation from the remaining red, black, and white wires, twist the white wires, fasten them with a wire nut, and tuck them into the box.

Optional Combinations of Controls

The combined control allows you to operate the fan in many different areas. Depending on the arrangement of your property, this can be a handy feature.

Connect the black wire from the ceiling fan box to the standard lug on the three-way switch if you want combined control of the fan and lights. The next step is connecting the red and black travelers from the second switch box to the other switch lugs.

See also  How Tasmota is to Connect And Is It Safe To Use?

Connect the red wire of the ceiling box to the standard lug of the other switch, and connect the black wire of the ceiling box to the standard lug of the three-way switch. This will give you separate control over the light.

Proceed to the next switch box and remove the remaining sheath from the hole where the power leg enters the container. After twisting the ground wires and allowing the tails to hang loose, join the wires to the grounding screw on the switch and crimp the ground.

To achieve independent control, just form a loop with each tail and hook it to the grounding screw of a button. Cut one of the tails off, loop the other, and connect it to the screw for combined control.

Wiring a Three-Way Switch

Three-Way Switch

It should be pretty easy to swap out a 3-way switch if you’ve swapped out a single-pole switch before. The extra wire in the container is the most noticeable change. An additional wire, called a “traveler” wire, links the two wall plates together.

It is a practice to connect one switch to the light and then connect that switch’s wires to the other two buttons in a three-way configuration. Even if your controller isn’t wired in this manner, you can still replace the switches by following the instructions below.

  1. Disconnect The Power at The Main Switch.

Discover the circuit breaker box. You may usually find the 3-way switch indicated by a label adjacent to a breaker. Turn off the circuit breaker. Testing the button before proceeding ensures the electricity is completely turned off.

  1. Unplug The Existing Light Switch.

The old switch may be accessed by removing two screws from the switch plate and the container itself. Remove the screws that are securing the control. The wires should be flexible enough to pull the switch out of the hole without disconnecting the cables.

  1. Examine The Cables and Determine Their Types

Depending on how it was connected, there may be two kinds of wires within the switch. If the cable has a ground wire in addition to the white and black wires, it is a 14/2 cable. A 14/3 line has a black wire, a white wire, a red wire, and a ground wire.

  1. Locate and mark the standard wire.

There need to be eight strands of wire in there. Two white neutral wires are attached with wire nuts, three round wires with wire nuts, a black wire with a copper or black screw terminal, and a red wire with a wire nut.

See also  Is There Any Limitation On Conversion From HDMI To USB?

The black cable is the “common wire” for a specific system. Put some electrical tape on it before you detach it so you will remember which wire is the common one.

  1. locate those wires by opening the second switch box

The second switch box needs four wires: a ground wire, a black wire, a white wire, and a red wire. The white cable might be marked as “hot” using black paint or electrical tape.

In this box, the black wire is the standard wire and goes to the common terminal. At this stage, it is helpful to label the normal wire.

  1. Disconnect the cables by unscrewing the wire nuts.

Ensure each wire has a label indicating its purpose and that you know what it does before detaching it. The terminal screws should be loosened and the wire nuts twisted off so the wires may be removed from the switch.

  1. Connect The Wires to The New Switches and Install Them

Verify compatibility before replacing the existing switches. Installing the same button in both places is recommended due to manufacturer differences in wire arrangements.

Label or use color coding to locate the shared connections on the new switches. The bottom part of the switch should have a black or copper terminal. Then, connect the shared terminals with the shared wires.

The red traveler wire then has to be connected between the two switches. The red wires go into the switch’s terminals on top. Be consistent and attach it to the same spot on both boxes’ top right or left.

Both units have a second traveler wire that must be joined together. In one, the traveler wire is black and unlabeled; in the other, it is white but covered with black tape or paint. Put these wires where the red wire usually would go on the higher terminals.

The first box’s three ground wires should be twisted together and secured, and the white neutral wires should be connected using a wire nut. The green terminal of the switch should be attached to the end of the shortest ground wire.

Go to the second junction box and attach the ground wire to the switch’s green or brass terminal screw. All of the wires should be joined together at this point.

  1. Inspect The Switches Once the Power Has Been Turned on And the Covers Have Been Installed

When you finish the wiring, you may put the switches back in the box and fasten them with two screws.

Replace the covers on the light switches. Return to the electrical panel and flip the control breaker to the “on” position. Flip the switches on and off to ensure proper operation.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *


How To Spy on Someone By Using Their Wi-Fi Connection?



The term “spying” refers to the illegal practice of gathering intelligence on an individual or group without their consent. Spying on someone over their Wi-Fi connection is becoming more feasible in today’s digital world.

To spy on a device without the owner knowing, a Wi-Fi connection must be established. How to eavesdrop on someone’s Wi-Fi connection is the topic of this article. The possible legal repercussions of this action will also be investigated.

We’ll wrap up by summarizing the paper and stressing the need of exercising care while conducting wireless eavesdropping.

Knowing whether or not it is lawful to eavesdrop on someone’s Wi-Fi connection is crucial. It might be illegal to do so in certain countries due to strict privacy regulations.

It can even be illegal in other nations. Therefore, before attempting to spy on someone through Wi-Fi, it is crucial to understand the laws in your country.

How to Spy on Someone’s Wi-Fi Connection

First, connect to wireless Internet. Either the target device’s network or a public Wi-Fi network may be used for this purpose.

Second, load up all required apps. It is possible to employ many different monitoring applications.

Third, get your Wi-Fi router up and running. Setting up a router for remote access is the means to this end.

Fourth, keep an eye on the equipment in question. After the router has been set up, it can perform remote monitoring of all connected devices. The user can monitor and even remotely control the device’s actions.

Possible Legal Complications

Spying on someone using Wi-Fi might lead to trouble with the law, particularly regarding privacy regulations and even criminal prosecution. Spying on someone without their consent or knowledge may be illegal in various jurisdictions. It can even be illegal in other nations.

See also  Revolutionize Your Home Security: What You Need to Know About Nest Aware?

So, before you go trying to eavesdrop on someone via Wi-Fi, you should familiarize yourself with the regulations in your country.

man in black hoodie using macbook-spy

Is it possible to spy on someone’s internet use using Wi-Fi?

Online users’ activities can be tracked by the Wi-Fi network’s owner. This is because the router, which all these devices depend on for sharing and receiving information, is under the network owner’s jurisdiction. The router’s configuration plays a significant role in governing this procedure.

Connected device monitoring tools are sometimes found in certain routers and others may require external software installation to record online activity. It’s also important to note that an eavesdropper could potentially intercept and see the data packets on a Wi-Fi network.

To safeguard your privacy when connecting to a public Wi-Fi network, there are solutions such as specialized software or technical know-how. A smart option is utilizing a virtual private network (VPN) for encrypting your internet data.

Can a phone be Connected using Wi-Fi?

A device’s location can be determined by its Wi-Fi signal, that much is true. There are many ways for doing it. Installing a third-party program that leverages the device’s Wi-Fi connections as a means of determining its position is one option.

Alternatively, you can use the gadget’s MAC address, a special number given to every gadget on a network. The MAC address may be used to trace the device across many Wi-Fi hotspots. Last but not least, the owner of a router with built-in location tracking capabilities may monitor the devices within a certain radius.

Note In order to employ a device’s Wi-Fi connectivity for the purpose of location tracking, it is imperative that said device be operational and inextricably linked to a wireless network.

Top Wireless Network Monitoring Application


Many different tools exist for spying on and monitoring devices within a wireless network. These instruments can be created by network administrators for the purpose of traffic tracking and troubleshooting.

Some, on the other hand, are advertised as spyware and designed for people who want to monitor the activities of other computers on the same network. Tools like mSpy, NetSpot, Wi-Fi Commander, Wireshark, OpenDNS, Advanced IP Scanner, Glass Wire, and Fing are all good examples.

See also  Are Smart Locks Worth It? Hint: You Can Forget Your Keys Now

Using these technologies to secretly monitor or spy on another device without the owner’s permission may be against the law in several countries. It’s also theoretically illegal to use spyware or harmful software to access another person’s device without their knowledge.

To inspect network activity in minute detail, you may use Wireshark, a free and open-source network packet analyzer. It’s put to use often in diagnostics, research, creation, and instruction.

You may quickly and easily discover what hardware is connected to your local area network (LAN) using Advanced IP Scanner, a free and dependable network scanner.

The ability to remotely power on and off machines, as well as access to shared files, are also provided. Both Wireshark and Advanced IP Scanner may be downloaded for free on Windows PCs.

OpenDNS is a free, cloud-based network management and monitoring service. Controlling and monitoring website access, blocking dangerous information, and safeguarding user privacy are all made possible.

Advanced IP Scanner is a powerful and quick tool for scanning networks for hidden devices. It may be used for network troubleshooting, network monitoring, and device management.

Glass wire is an advanced piece of software for monitoring networks and sending out alerts on suspicious behaviours. Information regarding the user’s network, such as bandwidth use, internet traffic, and more, is provided.

Fing is a free network program that can quickly locate and recognize computers and other gadgets on a local area network. It’s useful for troubleshooting networks, finding intrusions, and keeping tabs on traffic.

If you want to make sure your kid is safe online and using their phone properly, you may legally install a monitoring program on their smartphone called mSpy.

It claims to be able to track what your kids are looking at online and block any potentially harmful material. It is not advertised as a means to eavesdrop on people or read their text messages sent over Wi-Fi.

NetSpot is a wireless network analyzer and scanner that operates on the Wi-Fi standard. It has capabilities including viewing and evaluating WLAN locations, analyzing AP information, and showing real-time data on signal levels and noise that may aid users in identifying network difficulties.

Wi-Fi Commander: Wi-Fi Commander is a Windows 10 app that lets users scan their immediate area for any Wi-Fi networks, view and analyze

See also  Maximize Your Home's Energy Efficiency: How Does Ecobee Eco Work?

channel distributions in a unique touch-friendly 3D interface, monitor signal levels in real-time, filter, sort, and group available networks, and switch between networks instantly

. Its main selling point is as a device for assessing and bettering wireless networks.

How to Eavesdrop on Someone’s Wi-Fi Connection.


  • For starters, a wireless Internet connection needs to be established; this can be done through the target device’s network or via a public Wi-Fi network.
  • Employ various monitoring apps to load up all necessary ones second.
  • Setting up your Wi-Fi router is crucial in achieving remote access. This should be your third priority. The router is your gateway to connectivity.
  • The user should always monitor the equipment once it’s been set up. It’s easy to view the router from afar and keep a close eye on its actions. In fact, remote control of the device is even possible. Don’t forget this fourth step in ensuring proper equipment functioning.
  • If you’re attempting a Wi-Fi eavesdropping operation, it’s vital to take precautions. Prior to engaging in Wi-Fi spying, you must recognize the legal repercussions involved.

Can my iPhone be tracked over Wi-Fi?

An iPhone can be tracked remotely via Wi-Fi, so the answer is yes. Targeted devices may be spied on invisibly using a Wi-Fi connection and the appropriate monitoring software.

Does using Wi-Fi reveal where you are?

No, your precise position cannot be determined over Wi-Fi. However, it can give you details about the surrounding area.

When it comes to Wi-Fi, can you legally eavesdrop on someone?

Spying on someone without their consent or knowledge may be illegal in various jurisdictions. It can even be illegal in other nations.

Therefore, before attempting to spy on someone via Wi-Fi, it is crucial to understand the laws in your country.


The prospect of wireless espionage is a possible one, as it is within the realm of feasibility to conduct surveillance on an individual through the use of appropriate equipment and a Wi-Fi network.

It is imperative to exercise utmost prudence when working to engage in said activity, for it may be deemed unlawful in numerous jurisdictions.

The regulations governing privacy are both rigorous and dynamic, necessitating a comprehensive comprehension of the statutes in your specific locality prior to embarking on any such effort. The potential for legal and ethical jeopardy is not an uncommon occurrence.

Henceforth, it is imperative to contemplate the potential hazards that may arise from engaging in espionage activities prior to availing oneself of such technological instruments.

Continue Reading


How Do You Disarm A Blink Camera Properly?



Does an SD Card Need to Be Inserted into the Blink Outdoor Camera?

Your Blink cameras may be individually secured or released. The Blink Home Monitor app allows you to independently control the security of each camera you put up.

Choose the cameras you wish to arm or disable by touching the “Armed” symbol on the main screen. When the system is armed or disarmed, you may also choose to automatically arm or deactivate certain cameras.

Outside cameras, for instance, might be left on at all times, but certain inside ones would be activated only when the whole system is turned on.

Which Specific Features Are Shared Between the Blink Indoor and Blink Outdoor Cameras

Please help me turn off my Blink camera

If an attacker gains access to your Wi-Fi network, they will be able to remotely deactivate your Blink camera. Your camera may be turned off by anybody who knows your network password and can access the administrative settings.

They may also try reverting the router to its original settings, which would turn off the camera. Anybody using a Blink Sync Module might have their camera turned off if they held the Sync button down for more than 10 seconds.

And if they know your Blink app’s administrative credentials, they may log in and turn off the camera remotely.

How To Activate Certain Blink Cameras.

The Blink app must be installed on a mobile device before any Blink cameras may be activated. After launching the app, choose the desired camera from the list. Choose “Arming” from the list of available settings by clicking the “Settings” button.

Get the right answers to the security questions and follow the on-screen directions. Now your chosen camera is armed and will remain in this state until you manually disarm it.

It’s worth noting that you can automate the arming and disarming of your cameras by setting up routines for them. In addition, you may use your voice to activate Alexa to equip and disengage your security system.

Blink cameras may be scheduled independently.

Blink cameras may be set to operate on their schedules, of course. You may customize the app to suit your needs by setting individual schedules for each camera.

Each Blink camera may have its schedule customized by the user with up to five on/off times per day. Each Blink camera’s motion detection sensitivity may be individually adjusted, or it can be disabled entirely.

Different Blink cameras may be managed at various times of the day. Blink allows you to set timetables for when the cameras are on and off, dependent on the day of the week. When it comes to scheduling your Blink cameras, you have a lot of leeway and power.

How Many Blinks Cameras Are to Be Installed On A Single Module?

With the ability to connect up to 10 Blink cameras to a single Blink Sync Module, it’s simple to set up a robust surveillance network at home. Each Blink Sync Module is capable of connecting to ten Blink cameras and covering an area of about one thousand square feet.

See also  How Tasmota is to Connect And Is It Safe To Use?

Depending on the size of your house, you may link an endless number of Sync Modules together, and adding a second one will double the coverage area. One camera every 250-350 square feet of area is advised, in addition to one at each entry and exit.

How can you access the footage stored on the USB from the Blink Camera?-Disarm A Blink Camera

Even if Blink is disarmed, does it still record?

If Blink isn’t activated, it won’t keep any records. To begin recording, you must first equip your Blink system using the Blink app on an iOS or Android smartphone. In addition, your Blink camera or camera system, as appropriate for its setup, will need access to either Wi-Fi or cellular data.

By activating your Blink system, the cameras will begin to capture and preserve video of anything happening in their area of view. As well as customizing settings like motion sensitivity and recording duration, you can also choose the amount of time that video is kept.

The camera will not produce recordings while your system is disarmed since it will not detect motion or store any video.

Do I have to arm all Blink cameras at once?

One Blink camera may be activated at a time. The first step is to access the ‘Devices’ section of your Blink app. Tap the ‘Settings’ button after locating the camera you want to arm.

Arming parameters such as time of day and motion sensitivity may be customized from this screen. After you’ve saved the schedule, the motion detector will only activate on the days and hours you’ve chosen.

The Blink Outdoor Camera is a prime example of the adage that "good things come in little packages," and it does so in a very convincing manner.-Disarm A Blink Camera

Blink Camera’s Settings

Launch the Blink app on your mobile device, and then choose “Devices” to see the camera’s settings. When your Blink camera appears, choose it and hit the “Settings” button.

Toggle motion detection on and off by clicking the corresponding button at the very top of the settings page. Just below it, you’ll find two distinct buttons: one for arming Blink (for Away mode) and another for disarming it (for home mode).

In Away mode, the motion detection sensitivity may be adjusted to High, Medium, or Low; schedules can be created; and motion detection can be fine-tuned. Moreover, you have the option to get alerts whenever the camera picks any action.

Beeps, night vision, and live streaming are among more possibilities.

The same options are available in-home mode, plus a few more. Smart Notifications may be activated to give you motion notifications even when the camera is turned off.

If the motion is detected when the camera is disabled, you may activate Personal Alerts to have a notification sent to your mobile.

Last but not least, you may give your camera a unique name, turn on or off alerts, share your camera’s position with another user, set a custom auto-arm delay, or even remove it entirely.

What is the Blink app’s Running Man about?

The Running Man on Blink app is a great way to keep in shape, make new friends, and chat with runners all around the globe. It’s a programme that keeps tabs on your running stats like pace, distance, and energy used, and lets you compare your results with others.

You may put yourself to the test, get the benefits of doing so, and tap into the resources of a helpful virtual community. It’s a simple way to keep track of your running progress and share that information with your friends on social media.

Setting running objectives allows you to keep tabs on your improvement, and you may brag about your successes to your friends and the rest of the running world. The app keeps track of your running metrics, but it also lets you see and add routes taken by other users.

And just like any good virtual fitness competition, Blink has leaderboards where you can compare your performance to that of your peers. You may personalize your running experience, track your progress towards fitness objectives, participate in a variety of challenges and events, and more by joining a running club.

See also  Does A Smart Home Increase Your Home Value With These 6 Quick Upgrades?

What is the procedure for setting a timer on a Blink camera?

The Blink app, available for iOS and Android, is required to set up a schedule for your Blink camera. To establish a timer for your Blink camera once you’ve downloaded the app and created an account, do as follows:

  • To get started, launch Blink.
  • Choose the camera from your system that you want to set up on a schedule.
  • To access the configuration menu, step three is to click the gear symbol in the right-hand corner.
  • Go to the menu and choose the Schedule option.
  • From this menu, you can set the schedule for when your camera will record.
  • Choose the times you want, then click Save.
  • You’re through with your schedule planning after you’ve saved it.

You may now schedule when your Blink camera records. To make sure your camera is on and functioning properly, open the Blink app and go to the Live View menu.

It is possible to use the same Blink account on two different phones?

A single Blink account may be used on two different phones. Now, go over to and link your Blink account with an existing Amazon account or create a new one.

A Blink ID and password will be sent to you after the Blink installation is complete, and these credentials will work across all of your devices, including your secondary phone.

One Blink account may be used for many purposes, such as monitoring devices, viewing activity, adjusting camera settings, and more.

If you want to add more phones, you’ll need to input the identical Blink ID and password into each one. Your Blink account’s settings and cameras will sync across all of your devices, making it simple to take advantage of every feature.

By using the Blink camera, can two individuals simultaneously see the feed?

Observing the Blink camera simultaneously is possible with two persons. With the Blink camera’s free cloud storage, you can quickly share the live video stream with any other user, regardless of the device they’re using.

Just logging in with the recipient’s credentials will add them to the list of viewers and allow them to use the camera. This Blink camera allows for simultaneous viewing on two devices at once, so you and a friend can both keep an eye on what’s going on in front of it.

What is Blink’s recurring cost?

Blink’s monthly fees vary based on the kind of membership you have. The cheapest Blink plan is $4.99 per month. The most expensive plan costs $14.99 per month. Access to all Blink cameras, cloud storage, and the Blink mobile app are included in the Basic subscription.

All Blink cameras, cloud video storage, the Blink app, and other smart home connections are included in the Plus subscription. Whether you need further security for your home or company, the Blink monthly membership has everything you need.

When I sign up for a Blink account, how can I add devices?

To your Blink account, adding devices is a simple and quick process. Then, get the Blink app from the App Store or Google Play and install it on your mobile device. After signing in, you’ll be able to add several gadgets to your account.

Just follow these procedures to add all of your Blink devices:

  • Pick a site and provide the whole street address where you’d want to set up your gadgets.
  • Choose a product category that appeals to you from the options provided.
  • Decide what kind of device you’d want to connect, such as a camera or a doorbell or an interior or outdoor camera.
  • After selecting your device, you will be given instructions on how to get started. Make sure everything is hooked up correctly by following this instruction.
See also  Maximize Your Home's Energy Efficiency: How Does Ecobee Eco Work?

When you’ve finished the initial setup, your device will be connected to your account.

When you set up a Blink account, you may invite anybody living in your home to utilize the Smart home technology. For this purpose, they need just to have access to your account information.

You may connect all of your gadgets to your Blink account by following these instructions. Because of this, you can keep an eye on your house from afar and view recorded footage whenever you choose.

What do I need to do to transfer the video from my phone to another device?

There are a few stages involved in connecting your phone’s camera to another phone, but they vary widely depending on the specifications of the two phones you’re using.

A wireless transfer mechanism is often available if both phones have the necessary capabilities. In such a case, you may have to resort to third-party software, USB cable, cloud service, or another workaround.

To send data wirelessly, make sure the phones can “see” one another by turning on Wi-Fi and Bluetooth on both devices.

  • Install a file-sharing program, such as Files Go, from the Google Play Store on both devices.
  • Launch the app on both devices and tap “Send Files” or “Connect.”
  • Choose the picture or photos you wish to share, and then proceed as instructed by the app.
  • Allow the other phone to download the files when requested.

If you’re looking for a USB cable, then:

  • Put your phone’s charging end into the USB cord first.
  • Connect the opposite end of the USB cord to the port on the second phone.
  • Launch your phone’s picture app, choose the desired image(s), and save them to your home screen.
  • Share the photos by sending them from one phone to another.

For an external app:

  • First, on both devices, install third-party software like Share it or Xender from the Google Play Store.
  • To launch the app on both devices.
  • Follow the on-screen prompts to choose the photo(s) you want to send from your phone.
  • Accept the incoming files on the other phone when requested to do so.

While using a cloud-based service, you should:

  • Sign up for a free cloud storage service like Google Pictures or Dropbox.
  • Use two different phones to access the account.
  • Then, choose the photo(s) you want to post.
  • Place the image(s) in a cloud storage service.
  • Transfer the image(s) to the second device.

Do Blink Cameras Provide Network Connectivity?

Blink cameras can be synced with one another. Connecting many Blink cameras into one system allows you to keep tabs on your home, workplace, or other places from a central location. It is useful if you have many locations that need to be watched.

The added clarity from having numerous cameras in the same location is a welcome bonus. The Blink app makes it simple to set up a network of Blink cameras, allowing for centralized monitoring of various sites.

Changing the sensitivity of motion triggers and the regions being watched are just two examples of the many options that can be adjusted for each Blink camera. It’s easy to maintain tabs on numerous areas when you connect your Blink cameras.

What if I already have my Blink camera linked to another account?

To access your Blink camera again if it is already linked to another account, just restore it to its original settings. For this, you’ll need to keep your finger on the camera’s sync button until the camera’s LED light begins flashing blue and green, a process that should take around 10 seconds.

It is expected that after resetting the camera, you will be able to add it to your account using the mobile app. Blink’s customer service is available if you have any problems establishing a connection between your camera and the app.

How long does it take for Blink to retrigger?

In Blink, this interval is measured in terms of the retrigger time, which is the time required for the system to detect motion twice in a row. The timer keeps track of seconds, and the interval between alarms may be adjusted as needed.

By adjusting the retrigger time, you may select the duration of time that must pass before another motion alert is triggered.

With Blink, the minimum time before a motion alert is delivered is five seconds. On the other hand, the retrigger time may be set to 12, 15, or 30 seconds. To avoid receiving false motion alerts from dogs and other tiny things increasing the retrigger time is a good option.

But, if the retrigger time is set too high, you may miss real motion alerts, like someone entering or leaving the Frame.

Continue Reading


How to Spot a Spy Camera in Your Bathroom Mirror or Room?



white plastic tool

There has been an increase in the number of complaints about the usage of spy tools and covert cameras for unethical purposes. The majority of these spy cameras are aimed at unsuspecting visitors who are staying in hotel rooms, Airbnb homes, cruise ships, and other types of accommodations.

It is unfortunate to report that it seems that this pattern will not appear to be controlled any time soon. It is to your advantage to be aware of and able to implement, preventative steps against becoming a victim of crime.

The bathroom mirror is one of the most typical locations for a covert camera to be concealed. Examine the mirrors in the restroom, the trial rooms, and any other relevant locations.

As the opposite section of the mirror may seem to be the same as a standard mirror, some malicious people place a concealed camera on the other side of the mirror that is see-through.


What you need to be sure of is:


Proceed inside the location while maintaining the pretence that you are being watched. If this is your first time staying in a hotel or Airbnb, you should prepare yourself mentally for the possibility that someone is observing your every move.

You may assume the role of a detective and conduct a comprehensive search of the region if you adopt this mentality.

If you assume that you are being observed, it will be easier for you to avoid being a victim. You need to look in every mirror in the room to ensure that there is not a two-way mirror on any of them. On the other side of a two-way mirror, a camera is concealed on its surface.

See also  Are Smart Locks Worth It? Hint: You Can Forget Your Keys Now

Checking to see whether a room has a two-way mirror may be done in many different methods, including the following:

The Test of the Fingernail

The first step in using your fingertip to determine whether or not a mirror is a two-way reflection is to put your finger on the surface of the mirror. Take note of what your fingertip looks like reflected in the mirror.

If the reflection of your fingertip and the surface of the mirror cannot come into contact with one another and there is at least a quarter-inch space between them, then the mirror is clean.

However, if you put the tip of your finger on the mirror and the reflection moves to contact your finger, you will see that the mirror is not entirely trustworthy.

If you want to know for sure whether or not something is a two-way mirror, you shouldn’t rely just on the fingernail test. There are a few elements that could influence the results that you get:

It is difficult to discern whether you are touching your reflection or something else entirely while you are in this position. Many different things may affect it, such as the lighting and the substance that the mirror is made of.

When you believe you are touching a first surface mirror, there are times when you are not doing so.

In addition to this, a two-way mirror may be a mirror with a second surface. Do not put all of your faith in the results of this test alone if the lighting and environment in which the mirror is situated have shown that it seems to be a two-way mirror.

Some businesses, such as gas stations and pubs, employ a metal back with a mirror tint rather than an actual mirror, which may create the impression that they have a two-way mirror. It is to prevent the mirror from shattering, which would be a liability for the company.

See also  Revolutionize Your Home Security: What You Need to Know About Nest Aware?


Make sure that there isn’t a two-way mirror by looking for it with a flashlight.

Because a two-way mirror can function as both a mirror and a window simultaneously, these mirrors are the ideal choice for concealing cameras. You may use a flashlight to inspect the mirror if you have any reason to believe that it is not functioning properly.

After turning off the lights in the room, place the flashlight against the glass, and then turn the lights back on. If you can view the area on the other side of the mirror, then you will know that it is a two-way mirror.

Check that the mirror was put in correctly.

Examine the mirror to see whether it seems to be hanging on the wall or if it is a part of the wall. Check the rear to see if there is a wall there if it seems like it could be hanging.

If it is an integral part of the wall, then there is a possibility that it is a two-way mirror that is built into the wall rather than being hung on the wall. People on the other side of the wall will be able to see whoever is in front of the mirror as a result of this.

A layer of a micro pane, also known as “two-way mirror coating,” is often applied to the surface of a two-way mirror.

If you are standing on the treated side of the mirror when you look at yourself in it, you will be able to see your reflection; but, if you are standing on the untreated side, the mirror will seem to be tinted.

If there is a wall behind the mirror, then you can be certain that it is nothing more than a standard mirror.

See also  Guide for New Home Owner: How To Reset Simplisafe?

When it comes to installation, bolting is not necessary for a standard mirror. If you attempt to raise the mirror on the wall and find that it is placed in the wall or fastened into it, then you will know that there is a two-way mirror there.

Putting Fingers to the Mirror


You may also use the tap method to determine whether or not there is a two-way mirror in the room. The sound that is produced by a standard mirror is described as being flat and dull, whereas the sound of a two-way mirror, which has space behind it, will be described as open, crisper, or hollow.

If you believe you have a two-way mirror, the most effective solution to deal with it is to either hang another mirror over it or cover it with a piece of paper.

Make sure the Lighting is Okay.

Check the level of illumination to see whether it seems to be much higher than normal. In such a case, you may be looking into a two-way mirror. On the other hand, if the illumination in the room is normal and you cannot see through the mirror immediately away, then it is a typical mirror.

The light must be 10 times brighter on the side of the two-way mirror that is being reflected than it is on the side that is not being reflected. You will be able to see clearly through the glass to the observation area even if the lighting is dimmed.

Examine the View from Within the Glass

Put your face inside the mirror, then cup your hands around it to create a tunnel that will block as much light as possible. Place your face in the mirror.

You should be able to see what is on the other side of the glass if the light in the observation room is brighter than the light on the side of your mirror.


Now that you are aware of what to do, you should not be alarmed if, upon entering the room, you see a mirror that appears to be in disrepair. whether you keep in mind these simple procedures to figure out whether someone is watching you, you won’t have to worry about your safety.

Continue Reading