Solutions
How to Connect Your Vizio TV to WiFi Easily Without a Remote?

Have you misplaced the remote control that came with your Vizio TV?
Or maybe the TV was present to you, but the remote control wasn’t. I have some encouraging information for those of you who own a more recent model of Vizio television.
You can control your television with your smartphone rather than requiring the use of a traditional remote-control device.
Downloading the Vizio Smart cast app will allow you to connect a Vizio TV to Wi-Fi without the need for a remote control. After it has been downloaded, the Vizio Smart cast App can establish a connection with your TV via the use of Bluetooth.
After you have successfully connected, you can next use the app to connect the Vizio TV to the wireless network.
There are alternative options available to you if the Smartcast app cannot be used on your Vizio TV because it is not compatible with it.
Investing in a universal remote is going to be the quickest, least complicated, and most convenient method to connect your Vizio TV to Wi-Fi if you don’t have a remote.
On Amazon, you may purchase new remotes at a price that is far lower than $15. Simply click on this link to be sent to Amazon. (Affiliate) This applies to remotes manufactured by Vizio as well as universal remotes that only mimic the design of a Vizio remote.
In any case, you have access to a few technological options that you may test out.
If for any reason you are unable to receive a remote control at this time, one of the following options ought to be able to assist you:
How Do I Connect My Vizio TV To My Wireless Network If I Don’t Have The Remote?
First things first: check that your television is within range of your Wi-Fi network before doing anything else. Put your smartphone close to the television and evaluate the strength of the signal that it is getting to determine whether or not the problem is with the TV.
The App for the Vizio Smart cast Device as a Method
You may do this by going to Google Play on your Android smartphone or the App Store on your iPhone.
You may get the Vizio Smart cast App by searching for it and downloading it.
Begin the search for apps on your television device.
Select the choice for the connection, and then key in the code that shows on your television.
Within the settings, locate the Wi-Fi option, connect your device, and input the password.
The Ethernet Protocol and Method
It does not have Wi-Fi capabilities, however, there is another option available if you want internet access for the television:
Bring your router into closer proximity to the television. Obtain a cable for the ethernet.
Establish the connection between the ethernet cable and the router. You need to attach the other end of the cable to the television.
The Infrared Blaster System
Download an app that acts as a universal remote, such as IR Universal Remote, Galaxy Universal Remote, or AnyMote Smart IR Remote.
- Launch the application and make a connection request to your television.
- Your app will need you to enter the connection code.
- Get access to the several possibilities that are offered via the app.
- Select the Wi-Fi option on the menu, and then connect your TV.
How Do I Change The Settings On My Vizio TV If I Don’t Have The Remote?
Have you broken it, misplaced it, or lost track of it? If you need access to the settings of your Vizio TV, there is still a workaround available. You should be able to locate physical buttons on the body of the TV for the majority of models; they are there.
Even if you have a Vizio remote, there is no guarantee that the menu button will be accessible.
If you misplace your remote for your Vizio TV and hence are unable to access the settings, what should you do? It’s not as complicated as you would think it is.
Imagine that you can’t see the buttons on the screen.
Examine the top of the television set, as well as the sides and the rear. Investigate every nook and cranny of the television.
These controls will not be included on any Vizio television set.
There are hardly any smart TVs that merely have the power button. Therefore, you will need to make a greater effort to locate the buttons on the menu. On some versions, you’ll discover that the only buttons present are for the power, the volume, and the input.
If you are unable to locate the physical buttons, you should probably go back to the instruction booklet. In most cases, it will include a schematic depicting the TV and all of its component elements.
If none of the other options work, you might try installing an IR Remote on your mobile device and using it.
Apps of this kind link to your television via the use of infrared technology, much like a traditional remote control. If you can establish a connection using IR, the settings menu of the application will be much simpler to reach.
If your television does not have an IR receiver but does have a USB port, you may buy an IR USB dongle and put it into the TV to make it work with IR. Even if your TV doesn’t already support infrared (IR), this accessory will enable it for you.
If this does not work, look for the Vizio Smartcast App and download it. Without a doubt, this is the safest and most dependable approach to making adjustments to the settings of your Vizio TV.
If it did not work for you, keep in mind that you may get a Vizio remote from Amazon and have it delivered the next day. You may also purchase a universal remote.
If I don’t have the remote, how can I access the menu on my Vizio TV?
The vast majority of Vizio TV models are equipped with physical buttons on the actual display of the television. They are usually located on the back or sides of the television set. In most cases, there will be buttons for controlling the power, the volume, and the input.
The majority of Vizio TVs do not include a dedicated menu button. Either purchase a remote or download the Vizio Smart cast app to control the TV.
In that scenario, give the Vizio Smart cast app a try by installing it and connecting it to your television. After you have successfully connected, go to the Control option, and from there, go to the menu.
Experimenting with connecting other devices, such as your laptop, Xbox, or PlayStation to your TV is another option you may want to explore. They may allow you to use the remote control and navigate the menu, but only with certain restrictions.
Solutions
How to Shut Down Beats Studio 3 Step-By-Step?

It took us some time when we received our Beats Studio 3 to figure out what each of the buttons on the side did. Particularly, when we used them for the first time, we did not know how to switch off Beat’s Studio 3.
Because there are so many functions and buttons, it might be difficult to figure out how to turn them off in the correct manner. To your great fortune, shutting off your Beats Studio 3 headphones is a really simple process.
Simply pushing and maintaining pressure on the power button on your Beats Studio 3 for five seconds will allow you to switch the device off. The headphone will first turn ON, and then it will go fully OFF, and the lights will follow suit.
Nevertheless, there are a variety of factors that might make it difficult for you to switch off your Beats at times. In this post, we will not only describe how to turn off the Beats Studio 3 headphones by using the power button, but we will also show how to turn the headphones off manually.
Where Can I Find the Off Switch for Beats Studio 3?
Although turning off your Beats Studio 3 may not be very difficult, doing so is certainly not very obvious. The power button may carry out a variety of different functions, depending on how it is pushed by the user.
- Therefore, to turn off the Beats, you will need to get familiar with (at the very least) how to operate the power button.
- To turn the left earpiece on, you need to press and hold the power button for a few seconds.
- The blinking will begin on the LED light that is located on the earpiece.
- Release the power button after the LED light has gone out entirely after you have continued to keep it down while it is on.
- Your headphones have been disconnected at this time. Simply pressing the power button once more will restore normal operation.
One thing that we often see other people doing incorrectly is continuing to press the button even after the lights have been turned off. If you do that, there is a possibility that the headphones may turn themselves back on once you release the button.
After the lights have been turned off, you should release the button and then visually check to be sure that the headphone lights have not been switched ON after you have released the power button.
Does the Volume on the Beats Stop by Itself?
The Beats Studio 3 headphones do not come equipped with a function that will turn them off automatically. It indicates that to preserve the life of the battery, you will need to manually switch off the headphones.
If you do not switch off your Beats Studio 3 headphones, the battery will continue to discharge even after the headphones have been removed from your ears.
https://youtu.be/vChoUEVoLFY?si=xaVKxogkfIpzbLyE
It may cause the battery life of the headphones to be shortened, and it may potentially cause the headphones to cease operating entirely. Because of this, it is essential to ensure that your headphones are always turned off when you are not using them.
Beats Studio 3 Won’t Turn Off – Attempting to Diagnose the Problem
Turning off your Beats Studio 3 headphones shouldn’t give you too many problems in the majority of situations. The procedure is uncomplicated and uncomplicatedly easy.
On the other hand, if you discover that you are having difficulty shutting off your Beats headphones, there may be a problem with the headphones that has to be fixed and you will need to consult the user manual.
Charge your Beats up to the appropriate level.
A low battery level is one of the most frequent causes for your Beats Studio 3 headphones to remain on even after you have removed them from your ears.
It is possible that the headphones may act erratically and that some functionalities will not operate as intended while the battery is running low.
The low battery may be the cause if you are unable to switch off your heartbeat when the battery is at a very low level.
Your headphones may need to be charged for a time before you can successfully switch them off again after trying to repair this problem.
Check to see whether the power button is broken.
The inability of your Beats headphones to switch off (or on) might be the result of a defective power button.
If you have used your headphones for an extended period, the power button, which is the component of the headphones that are likely to have been used the most, may become defective.
The collection of dust and dirt beneath a button is the most typical reason for it failing to work properly. This accumulation inhibits the conducting surfaces from making adequate contact when the button is pushed.
You may use WD 40 Spray to clean the button if you are the kind of person who enjoys doing things on their own, but if the task sounds daunting to you, it is usually a good idea to obtain assistance from Apple or a third-party repair agency.
https://www.smart-techie.com/what-are-the-buttons-on-sonos-roam/
You need to fix your Beats.
Problems with the software are still another possible root cause of this issue. It is possible that your headphones will not react to your efforts to switch them off if the headphones are not correctly synchronized with your smartphone or if there are any software issues.
Apple Support suggests that you reset your headphones by holding down the power button and the volume down button for ten seconds to fix this problem procedure may be found on the headphones themselves.
Any software problems, whether they were brought on by transitory cache buildup or any other factor, may be eliminated with a soft reset. Additionally, it will unpair any devices you have already linked, forcing you to do so once again.
If doing a soft reset does not resolve the problem, you could also check to ensure that you are using the most recent version of the firmware.
If you have an Apple smartphone, your Beats will get automatic updates; however, if you have an Android device, you will need to manually check for updates inside the Beats app.
Completely deplete your battery
Simply putting your Beats aside and letting the battery run down to the point where it automatically goes off will solve the problem if they are not turning off.
After that, make sure that your Beats are completely charged, and then the power button on your Beats should be able to typically switch the headphones off and on.
Disconnect & reconnect Bluetooth
Another hack that we came across that proved well for other folks is this one. Remove the battery from your phone, wait a few minutes, and then reconnect the Bluetooth connection.
Now that you’ve reconnected your Beats to your phone, try shutting them off by pushing and holding the power button for a few seconds while they’re still connected.
Where can I find the Off Switch for Beats Studio 3?
Simply pushing and maintaining pressure on the power button located on the left earcup of the Beats Studio 3 headphones for a few seconds will allow you to turn off the headphones. This step-by-step guide will show you how.
If you are having problems shutting off your headphones, there are many potential causes, including being linked to a device through Bluetooth, having a low battery, or having insufficient power in your headphones’ battery.
You should have no difficulties turning off your Beats Studio 3 headphones if you follow the instructions that have been explained above and solve any possible problems that could arise.
How can I ensure that Beats Studio 3 closes when I want it to?
You may try resetting your Beats Studio 3 headphones if you find that pushing and holding the power button does not cause the headphones to turn off. Keep both the power button and the volume down button down simultaneously for ten seconds to reset your headphones.
After you have reset the headphones, you should try turning them off once again by pushing and holding the power button for about five seconds, or until the LED light on the earpiece flashes red and then shuts off.
What are the steps to start Beats Studio 3?
To activate your Beats Studio 3 headphones, you will need to press and hold the power button located on the left earpiece until the LED light located on the left earpiece begins to flash white.
Verify that your headphones have received an adequate amount of charge if you are unable to get them to switch on.
When they’re folded up, do the Beats automatically turn off?
When folded, the Beats Studio 3 headphones do not have an automatic power-off feature. It is necessary to press and hold the power button located on the left earpiece of the headphones for about five seconds to switch off the headphones.
After this period, the LED light located on the left earpiece will flash red and then turn off. The power state of your headphones will not be affected by folding them up.
Solutions
5 Solutions for Hunter Fan Remotes When They Are Not Working Properly.

Whenever your Hunter fan does not react to the remote, there is a reasonable probability that there is a problem with your remote controller or the settings of your lover.
You won’t be able to use the remote control to operate the Hunter fan if it doesn’t seem to react to the inputs you provide it using the remote control.
Even if this is your problem, there is no need to worry since we have you taken care of. Fixing the problem is as easy and fast as following any of the steps on our list, yet doing so might decide whether it is resolved.
If the remote control for your Hunter fan is not working, you should first check the power switch on the fan and then the circuit breaker in your house. After that, check the infrared light on your remote control. After that, you must re-batteries your remote control and link it to the fan.
Now that you are aware of the answers, let’s first look at the most common reasons your Hunter fan not responding to a remote:
Why Doesn’t My Hunter Fan Respond When I Use the Remote Control?
Incorrect frequency settings on the remote control or a defective remote are the two most likely reasons why your Hunter fan is not responding to the remote control. The following is a list of the most frequent factors that might be causing your Hunter fan to not work:
-
Exhausted Batteries
If you use the remote control for your Hunter fan until the batteries run out, the fan will not listen to your orders.
It Appears That Your Fan Is Not Getting Power. Every house has a circuit breaker that shuts off electricity to appliances in the event of a surge. The electricity to your Hunter fan may be disabled.
-
Weak Signal
Even if you replace the batteries in your remote control, it cannot operate if the infrared (IR) transmitter is broken.
-
Fixed Button
When a button on your remote control becomes stuck, it will repeatedly transmit the exact instructions.
-
Incorrect Frequency
If the installation of your Hunter fan was not done correctly, the fan would not respond to any orders sent from the remote control.
-
Remote Control Device That Is Defective
You may need to swap the Remote for a new one if it has been physically damaged or was manufactured with a flaw.
Warning: If you conduct any direct repairs on the Hunter fan, you need to ensure that the home circuit breaker is turned off first so that there won’t be any electricity flowing through the fan while you work on it.
If you mess with a gadget that is still linked to an operating voltage, you put yourself in danger of being hurt.
How Do I Fix the Hunter Fan Remote If It Is Not Responding?
If your Hunter fan is not operating correctly, the problem will likely be located inside the remote-control device, the fan itself, or the power switch on the fan.
Please follow our solutions in the order below, and do not skip any of them to get the most significant possible outcomes.
https://youtu.be/dbLnNEZYUAQ?si=RRGOrhHZGxMduqXC
Solution No 1: You should switch out the batteries in your remote control.
It is possible that the batteries in your Hunter fan need to be replaced if the device does not react at all to the inputs from the remote controller or if it only functions at an incredibly close range.
- Turn your Remote over and open the battery compartment on the back.
- Take out the worn-out batteries and put some brand-new ones in their stead.
- After ensuring the batteries are correctly installed and replacing the panel covering them, give the Remote for your Hunter ceiling fan another go at controlling it.
If you have tried our methods and they have yet to be successful in getting your Remote to operate, it is most likely that the remote control itself is broken.
Note: If you want to ensure that the infrared light on your Remote is functioning correctly, aim it toward the camera on your smartphone and see whether or not any light shows on the screen. If the light stays on, some of the buttons may be stuck.
Solution No. 2: Check Your Power Switch as Well as Your Circuit Breaker
Check the breaker in the circuit.
If the Hunter fan you have does not react to the signals sent by the remote control, you first need to ensure that the fan itself is operating correctly.
The following is a list of techniques to determine whether or not your Hunter fan has power:
Make sure that the wall power switch for the Hunter fan is activated if you have one.
If the power switch on your fan is switched on, but you still do not have any power, check to ensure that the circuit breaker is not blocking the flow of electricity to your fan.
https://www.smart-techie.com/what-to-do-when-your-ecobee-fan-dont-turn-on/
After ensuring that your fan receives the correct amount of electricity, use the remote control to test whether or not it is reacting.
Note: If your Hunter fan is not receiving orders from the remote controller, try moving the controller physically closer to the fan.
Solution No 3: Check the Signal on the Remote Control Check the signal on the remote control
When the infrared light on your remote controller isn’t operating correctly, it’s a typical reason why your Hunter ceiling fan won’t react to the remote control.
If your Remote has a problem, which sends infrared light to your Hunter fan to connect and follow commands, your lover will not respond.
To determine whether or not the infrared (IR) light on your remote control is operational, you will need to use the camera on your smartphone. The human eye cannot see infrared light, but digital cameras can pick it up.
Checking your Remote for a malfunctioning IR light may be done as follows:
Gather your mobile device and launch the camera application.
You should take the remote control for the Hunter fan and aim it in the direction of your camera.
While keeping your eyes on your phone’s display, use the buttons on your Hunter remote.
Keep an eye on the collection of your phone for the light to start blinking.
Note: If you find that the light that appears on your phone’s screen stays on continuously even when you are not pushing any buttons, this indicates that one of the keys on the remote is stuck.
Solution No: 4 Set Fan Frequencies Alter the frequency settings in various ways.
The frequency is likely incorrectly programmed if your fan does not react when you try to operate it with the remote control.
A DIP unit on your Hunter fan allows you to manually adjust various frequencies for your device.
When you make these adjustments, there is a greater possibility that you will avoid problems caused by the previous frequency settings for your remote control.
The following is a list of the actions you need to do to modify the frequency settings on your Hunter fan:
- Turn off the electricity to the fan by switching the circuit breaker to its off position.
- Remove the protective fan panel covering its circuitry using the appropriate screwdriver.
- Locate and get hold of the DIP switch module on the receiver.
- You may use a metal pen or a thin screwdriver to change the frequencies stored in the DIP.
- Make a note on paper of the new settings for the DIP switches.
- Replace the protective cover on the fan, then reattach the screws to hold it in place.
- Check to see whether you can transmit signals using your Remote once again now that you have completed these procedures.
The following remedy will rectify the problem, provided it needs to be appropriately set to operate at the new frequency.
Note that the DIP uses a combination of three or more switches, each capable of producing a unique frequency combination.
Solution No. 5: Connect the Remote Control to the Fan. Once again, connect the Remote to the fan.
When you first get a replacement remote control for your Hunter fan, you will need to “pair” it to the fan so that it may be used.
Repairing the Remote is required if it was previously inappropriately attached to your Hunter fan or became detached.
Please be aware that the methods outlined below are only suggestions and may change based on the remote-control type you have and how you set your Hunter fan up.
The following is a list of the basic actions that need to be taken to connect your Hunter fan with a remote:
- Take off the lid of the batteries on your remote control, and look for the pair button.
- Put your fan in the off position by utilizing the power switch on your wall.
- Keep the fan off at least ten seconds after turning off the electricity.
- Restart the Hunter fan by turning the power back on at the switch.
- You need to hit the pair button on your Remote, then immediately let it go.
Because the button for pairing executes a toggle instruction, it may also be used in the same manner to unpair your remote control.
After you have finished these procedures, check to see whether your Hunter fan is now rightly receiving inputs from your Remote. If it does not work, do each of these instructions many more times.
Note that each of these procedures must be completed within three minutes of the previous one for the pairing to occur correctly after power cycling your fan.
If your Hunter fan does not react to the remote control, you must change the batteries in the remote and verify the intensity of its infrared signal. Next, check to see if the power switch on your fan is turned on.
In conclusion, you should experiment with changing the control frequency of your Hunter fan and reprogramming the remote to broadcast the new frequency.
Conclusion
We hope that you will use the remedies we have provided to resolve the problem with the Hunter fan not responding to the remote now that you are aware of the potential reasons.
Solutions
How To Transform 3 Phase 220V Electricity Into A Single Phase?

There is always a means to adjust the maximum load that may be placed on an electrical installation. When you convert the electrical infrastructure from a three-phase system to a single-phase one, you can make this modification.
What Is Meant by the Term “Single-Phase Power”?
As the number of live wires in a circuit is what the phrases “three-phase” and “single-phase” refer to, a single-phase system will only have one, while a three-phase system would have three.
A two-wire, alternating current circuit is required for single-phase power, the kind of Electricity often found in houses throughout the United States. Only one of these cables carries electrical current, while the other is considered neutral.
The flow of electricity travels in both directions between the two. Alternating current is also used in the circuit for three-phase power, but instead of two or three wires, there are three to four of them. This kind of Electricity is often found in commercial structures.
The voltages used by single-phase and three-phase power solutions are distinct from one another. In most cases, 120 volts is necessary for single-phase Electricity.
Three-phrase may also utilize wires with a voltage of 120 volts for low-power loads, but it requires a voltage of around 208 volts for greater loads.
It is to your advantage to go from using three-phase power to using single-phase Electricity when you do not need a more excellent power supply. Single-phase Electricity, for instance, is used for low-horsepower appliances and residential heating and lighting loads.
How to Change 3-Phase Electrical Current to Single-Phase Current
Converting Electricity from three phases to a single step may be accomplished in many ways. Be sure to give some thought to your existing balancing requirements and a few primary safety considerations before you start.
https://youtu.be/pxnM9QLmWc4?si=rMvCrvlcYQmFS_7D
Remember that you are dealing with Electricity, so regardless of your approach, you should ensure that the main breaker is turned off, that you use tools with rubber handles, and that you wear gloves made of high-voltage rubber.
Do the following to change your system to operate on a single phase.
Make use of a neutral wire: Although this approach may not be as exact as some of the others, it is possible to convert the system by making use of a neutral wire and disregarding the other two phases that make up the three-phase supply line.
When a supply is not sensitive and does not demand high levels of precision, this choice is the one that will function the best.
https://www.smart-techie.com/how-many-electricity-consumed-with-usage-of-smart-plugs/
Utilize a phase converter: A phase converter may be linked directly to whatever motor you are attempting to convert. A phase converter can convert three-phase motors to single-phase motors.
After that, you will connect two wires from the motor to the converter, and after that, you will run two wires from the converter to your power source. After that, to convert the system, you must connect the inputs to the outputs using wires with the ends stripped off.
Utilize the open delta transformer: If you have a more robust system, you can quickly convert it using the available delta transfer method. When the power supply being restored is more than 5 kVA, this approach performs the best.
Utilize transformers of the Le-Blanc type Le-Blanc transfer is another way that may be used for more powerful systems. This system can reliably convert voltages and currents over 5 kVA and 400 volts.
How to Change a 3-Phase 220v System to a Single-Phase System
-
Turning off the Electricity
Before continuing with any procedures involving Electricity, turning off the power supply is always the first and most crucial step that must be taken. Even if you are attempting to find out how to connect a 220v socket that has three wires.
Power may be cut off at either the local circuit breaker or the main circuit board, depending on which is most convenient. If the compliance has a local circuit breaker, you must accurately identify the one that controls the flow of Electricity to the outlet or compliance.
An option that offers a higher level of protection is turning off the Electricity at the main panel. To turn off the specific circuit breaker, flick its switch.
Check the LED indicator to ensure no energy is coming from the outlet.If there are no visible symptoms, you may use a volt meter or an ammeter to investigate the circuit.
-
Selecting the Most Appropriate Method for the Conversion
A few different approaches may be used to convert three-phase Electricity into single-phase power. Before getting started, consider your existing balancing requirements and a few primary safety considerations. Let’s look at a couple other approaches:
Utilizing a Neutral Wire is the best option when a supply isn’t sensitive or doesn’t need a high degree of accuracy because of its use. Utilization of a Phase Converter To convert the system, a phase converter may be hardwired directly to compliance.
Utilizing the Open-Delta Transformer: If you can access a more potent piece of machinery, you can quickly transform it using the Open-Delta transfer.
It is up to the user to ensure that his essential use case is correctly selected since this determines which approach would be appropriate for the system’s level of compliance.
-
Employing the Use of a Neutral Wire
In situations where you do not need a high degree of precision in converting from three phases to a single stage, this approach is strongly recommended since it is the easiest way to accomplish it. It does not need any specific measures.
Instructions for Making Use of a Neutral Wire
Pick only one wire to connect to each of the three phases.
Pick the wire that will serve as the neutral for your connection.
You need just connect the wire for the phase you’ve selected and the wire for the neutral to the terminal for your compliance.
-
Implementing the Use of a Phase Converter Unit
If you consult an expert, they will almost certainly advise you to use a phase converter as an alternative to the neutral wire. This tactic seems more successful when generating an authentic conversation than the impartial wire technique.
Procedures to Follow When Utilizing a Phase Converter
Connect the compliance to the converter using two separate wires.
Once again, connect your power source to the converter using two separate wires.
Using the necessary tools, strip the insulation from the ends of two wires.
To change the system’s configuration, connect the inputs to the outputs.
However, for this strategy to be helpful, the Electricity used must be less than 5 KVA. Utilizing a different method would be preferable to achieve more power.
-
Using the Open Delta Transformer
If the system being converted has a VA rating of more than 5kVA, then you should utilize this procedure. The voltage from a three-phase supply is reduced to a single phase using an open delta connection transformer comprising two single-phase transformers.
Conclusion
Converting from three-phase to single-phase power may be required in certain conditions. For instance, if you wish to use Electricity for household reasons, you will want a system that operates on a single phase. You can do this by following the procedures that have been given above.
This post will review all the essential processes required to convert 3 phases to a single phase 220v. Everyone will find converting from three-phase to single-phase to be straightforward and uncomplicated if they follow the step-by-step instructions in this article.
-
Accessories10 months ago
Can A Hdmi Splitter Extend The Display To 2 Monitors?
-
Solutions10 months ago
Why is My Samsung TV Picture So Dark? Exploring the Possible Causes
-
Accessories10 months ago
Do Smart Thermostats Run On Batteries? Let’s Find Out
-
Solutions10 months ago
How To Fix Charging Not Available? Iphone Liquid Detected
-
Solutions10 months ago
Why Can’t I Stream Netflix From My Phone? | Solution
-
Gadgets9 months ago
Fitbit Symbols Meaning: What Do The Fitbit Icons Mean?
-
Solutions10 months ago
8 Ways How To Stop Google Home Nest From Crackling
-
Accessories10 months ago
Top 6 Garage Door Openers Work With Apple Homekit